Here is the outlet behind the cabinets, I was able to take the box out, pull the Romex loose from the wall, tie onto it and pull a new line up. I put a new box back in and reconnected the outlet to the new line.
Taking the line from the box behind the cabinets Matty drilled a drop and sent it down to the sprinkler control. There were already two holes cut in this wall for, phone and cable service, since we never had phones installed I used that spot for the outlet and installed the GFI here. While I had it all apart, I also took down all the wiring to the sprinkler valves that was on the outside of the wall and ran it internally.
Last weekend we finished up a project I have been wanting to do for quite a while. I purchased some FRP to put around the sink in the laundry room and when I started the project Tania decided to paint the laundry room. This then turned into installing a floating shelf and light above the sink. In the end it turned out good and should make keeping the walls around the sink much easier, plus I can see what I'm washing in the sink now.
